Training Process Hazard Analysis

Deskripsi

Training Process Hazard Analysis – The risk review techniques most popular for initial PHAs of entire units or of large projects, MOC reviews, and PHA revalidations are Hazard and Operability (HAZOP) analysis and what-if/checklist. Both of these techniques facilitate systematic, imaginative searches for process hazards and potential operational difficulties. In this PHA Training, you will also learn how to use the Failure Mode and Effects Analysis (FMEA) method and you will learn how to use check ats of hazards to supplement your brainstorming analyses. You will learn the best situations and circumstances to use each technique. This PHA Leadership Training course is mostly workshopsaill lead and participate in several analyses to familiarize yourself with each technique.

Materi Training Process Hazard Analysis

1. Introduction

• Learning Objectives
• Overview of Process Safety Management
• Risk Assessment Concepts
• Overview of PHA Requirements

2. Overview of Risk Review Methods

• Methods and Their Usefulness over The Life Cycle of a Process
• Making Risk Judgments
• Human Factors Concepts and How to Address Human Factors During Hazard Evaluations

3. Preparing for The Hazard Evaluation (Risk Review or PHA)

• Scoping The Analysis
• Choosing Technique and Level of Detail and Sections
• Choosing The Team Members
• Logistics and Procedures for Pre-Meeting, Meeting, and Post-Meeting Tasks

4. What-if/Checklist Technique: What-if/Checklist Review of a Continuous Process

5. HAZOP Technique: HAZOP Review of a Continuous Process

6. Analysis Documentation, Results, and Follow-up

• HAZOP Review of a Continuous Process
• HAZOP/What-if Techniques for Analyzing Procedures and Batch Processes

7. Failure Mode Effect Analysis (FMEA): FMEA of a Critical Auxiliary System

8. Checklist Analysis as Supplements to Brainstorming Methods: Using Checklists After Brainstorming Methods

9. Workshop: Estimating The Schedule & Labor Required to Perform a PHA

Note (Materi pelatihan bisa ditambah atau dikurangi disesuaikan dengan gap kompetensi yang diharapkan oleh client)

Baca juga pelatihan serupa :

Pelatihan Hazard Identification Risk Assessment

Training Key Performance Indicator (KPI) K3

Tujuan Training Process Hazard Analysis

1. Dapat memberikan gambaran umum tentang tujuan pembelajaran, konsep manajemen keselamatan proses, penilaian risiko, dan persyaratan PHA
2. Menjelaskan berbagai metode dan kegunaannya selama siklus hidup proses, membuat penilaian risiko, dan faktor manusia
3. Membahas ruang lingkup analisis, pemilihan teknik, tim, dan prosedur pra-rapat hingga pasca-rapat
4. Teknik What-If/Daftar Periksa – melakukan tinjauan dengan teknik ini pada sebuah proses kontinu
5. Teknik HAZOP – melakukan tinjauan HAZOP pada sebuah proses kontinu
6. Dokumentasi dan tindak lanjut hasil analisis
7. Analisis FMEA – melakukan analisis modus kegagalan dan efeknya pada sistem pendukung vital
8. Analisis daftar periksa – menggunakan daftar periksa sebagai pelengkap metode brainstorming
9. Perkiraan jadwal dan SDM untuk PHA – melalui lokakarya/simulasi

Jadwal Pelaksanaan dan Tempat Pelaksanaan

Harga

Offline

• Public Training mulai dari 5.000.000 – 7.000.000 perorang
• Inhouse Training mulai dari 850.000 perorang

Online

• Public Training mulai dari 1.200.000 perorang
• Inhouse Training mulai dari 600.000 perorang

Fasilitas

• Tempat Training Hotel Minimal Bintang 3
• Expert Training
• Lunch dan juga Coffee Break 2x
• Backpack Exclusive
• Jaket Exclusive (Souvenir)
• Modul Pelatihan (hard copy & soft copy)
• ATK
• Sertifikat
• Dokumentasi

Cek juga media sosial kami : https://www.instagram.com/anntamandirisejahtera?igsh=MTJpZWl3dzhjajUw